Serving Dallas, Fort Worth & the whole metroplex Mon–Sat 8am–5pm

How to Choose a Gutter Contractor in DFW: 12 Questions to Ask

Twelve questions to ask any DFW gutter company, the red flags that should end the call, and how to compare gutter quotes line by line.

To choose a gutter contractor in Dallas–Fort Worth, get two or three written quotes and ask each company the same 12 questions. Focus on coil thickness, hanger type and spacing, downspout size, who does the work, and the written warranty. The lowest price often leaves out removal, enough hangers or enough downspouts.

Texas has no state license for gutter installers. That means the questions you ask, and the answers you get in writing, matter more than any badge.

12 Questions to Ask Every Gutter Contractor

Ask each company these questions. Good contractors answer quickly and put the answers in the quote.

  1. Are the gutters seamless or sectional? Seamless gutters are formed on site and cut to the length of each wall. Sectional gutters come in short pieces with joints every 10 or 20 feet, and those joints leak first. We roll-form seamless gutters on site from coil.
  2. What coil thickness will you use? Standard residential aluminum is .027 inch. Heavy-duty is .032 inch, which is stiffer and dents less. If the quote doesn’t list thickness, ask why.
  3. What hangers do you use, and how far apart? Hidden hangers screwed into the fascia hold far better than old spike-and-ferrule nails. Expect spacing about every 24 inches, or closer, around 16 inches, under heavy trees.
  4. What size downspouts, and how many? 3×4 downspouts move about twice the water of 2×3. Ask where each one will go and where it will discharge. On DFW clay, water should land several feet from the foundation.
  5. Who does the installation: your crew or a subcontractor? Subs aren’t always bad, but you should know who will be on your roof. Ask who answers for the work if something goes wrong.
  6. Is removal and haul-off of the old gutters included? Some low quotes leave the old gutters in your yard or add removal later.
  7. What happens if you find rotted fascia? Rot often shows up only after old gutters come off. Ask how they’ll tell you, and whether they’ll hold that run until the wood is repaired. New gutters shouldn’t go up on soft boards.
  8. What does your written warranty cover, and for how long? Ask about labor, leaks at seams and corners, and the paint finish. Get the terms on paper, not just a verbal promise.
  9. Can you send a certificate of insurance? Ask for general liability and coverage for workers. Texas employers can opt out of workers’ compensation, so ask what covers an injured worker on your property.
  10. Will the written quote list each item? It should show gutter size, material, thickness, color and total feet. It should also list downspouts, extensions, guards and removal.
  11. What’s the timeline? Ask when materials will be ready, how long the install takes, and what happens if weather delays it.
  12. What’s your deposit policy? Ask how much is due upfront, when the balance is due, and what happens to the deposit if you cancel.

Red Flags That Should End the Conversation

Some answers are a reason to walk away. Watch for:

  • A one-line quote with only a total price
  • No coil thickness, hanger type or downspout size listed
  • Pressure to sign today for a “special price”
  • A large upfront payment before materials are ordered
  • No written warranty terms
  • No certificate of insurance, or excuses about sending one
  • Offers to pay or waive your insurance deductible, which is illegal in Texas
  • Promises to “handle your insurance claim”
  • Claims that gutters or guards will never need cleaning

After hail storms, out-of-town crews flood DFW neighborhoods. Our guide to hail damage and gutter insurance covers storm-chaser warning signs in more detail.

How to Compare Gutter Quotes Line by Line

Totals can hide big differences. Lay the quotes side by side and fill in a table like this:

Line itemQuote AQuote BQuote C
Gutter size (5-inch or 6-inch)
Material and coil thickness
Total feet of gutter
Hanger type and spacing
Downspout size and count
Downspout extensions
Removal and haul-off
Plan if rotted fascia is found
Guards, if any
Warranty terms
Deposit and payment schedule

Footage should be close across quotes. If one is much lower, they may have missed a run or a porch.

A higher quote with 6-inch gutters, .032 coil and more 3×4 downspouts may be the better deal. Our guide on 5-inch vs 6-inch gutters explains when the bigger size pays off.

What Fair Pricing Looks Like in DFW

Prices vary with gutter size, material, roof height and add-ons. As a baseline, 5-inch seamless aluminum runs $9–$14 per linear foot, and 6-inch runs $11–$17 per linear foot. Old gutter removal runs $1–$2 per linear foot, and downspouts run $8–$15 per linear foot.

A quote far below those ranges usually means something is missing. Check the quote for thinner coil, fewer downspouts or no removal. Our DFW gutter cost guide breaks down what moves the price.

How to Check Google Reviews the Right Way

Star ratings alone don’t tell you much. Read the reviews themselves:

  1. Sort by newest. Reviews from the last year matter more than old ones.
  2. Look for specifics, like crew names, gutter size, cleanup and how leaks were handled.
  3. Read the negative reviews and how the company responded. A calm, specific reply is a good sign.
  4. Look for photos of finished work on homes like yours.
  5. Be wary of a burst of short, vague five-star reviews posted close together.

You can read what our customers say on our reviews page. Ask any company for addresses of recent jobs you can drive by.

Know What the Warranty Covers Before You Sign

Warranties vary a lot between companies. Some cover only materials. Others cover labor, leaks and the finish.

Ask whether the warranty transfers if you sell the home. Ask how to file a warranty call and how fast they respond. Our warranty page lists our written terms so you can compare.

Get a measured, written quote

Send your address and a few photos of the roofline. We will tell you what you need — and what you don't.

If you’re replacing old gutters, our gutter replacement page explains how we measure, remove and install each run. If you’re weighing guards too, see our gutter guard installation page.

Frequently asked questions

Do gutter contractors need a license in Texas?

No. Texas has no state license for gutter or roofing contractors. Some cities require registration or permits, so ask about insurance, written warranty terms and local work history instead.

How many gutter quotes should I get?

Two or three is enough. More than that rarely helps unless the quotes are wildly different. Compare them line by line, not just by total price.

Is it normal to pay a deposit for gutters?

A modest deposit is common, especially for custom colors. Be wary of large upfront payments, and get the deposit amount and refund terms in writing.

How long does a gutter install take?

Most single-family homes take one day once materials are ready. Scheduling, custom colors and weather add to the wait before install day.

Should the gutter contractor pull a permit?

Permit rules vary by DFW city. Ask the contractor whether your city requires one for gutters or drainage tie-ins, and check with the city's building department if you're unsure.

Ready for gutters that fit your home exactly?

Send the address and a couple of photos. We measure, quote in writing, and form your gutters on site.